※一部利用できない機能があります
ディーゼルノズルより噴出する間欠噴霧の初期微粒化過程の観察
- フォーマット:
- 論文
- 責任表示:
- 高橋, 秀夫 ; 柳沢, 洋樹 ; 志賀, 聖一 ; 柄沢, 隆夫 ; 中村, 壽雄
- 言語:
- 日本語
- 出版情報:
- 日本機械学会, 1995-01-25
- 著者名:
- 掲載情報:
- 日本機械学會論文集. B編
- ISSN:
- 0387-5016
- 巻:
- 61
- 通号:
- 581
- 開始ページ:
- 351
- 終了ページ:
- 356
- バージョン:
- VoR
- 概要:
- application/pdf<br />Journal Article<br />The atomization behavior of an intermittent fuel spray from a diesel nozzle was clearly observed by means of shadowgraphy using an image-converting camera with the framing rate of 10^5 f.p.s. and an image-intensified CCD camera with high-speed gating. A rather wide range of valve-opening pressure (5 to 70 MPa) was covered, and simultaneous measurement of the injection pressure inside the nozzle sac was also attempted … to clarify the atomization mechanisms at its very early stage of injection. At the beginning of injection, the emergence of a liquid column was observed. Initially, it has almost the same diameter as the nozzle hole and then spreads radially, forming the spray angle in the vicinity of the nozzle exit. The timing of this spray-angle formation becomes earlier with the increase in valve opening pressure, even if the pressure inside the nozzle sac at this moment does not vary. This pressure approximately corresponds to that of the transition region in an atomization regime of a steady jet. 続きを見る
類似資料:
日本機械学会 |
日本機械学会 |
日本機械学会 | |
日本機械学会 |
日本機械学会 |
日本機械学会 |
日本機械学会 |
日本機械学会 |
日本機械学会 |
社団法人日本機械学会 |