※一部利用できない機能があります
| 1.
論文 |
論文
|
小島, 宏行
概要:
application/pdf<br />Journal Article<br />This study is concerned with the trajectory planning method of a CP control flexible robot arm by using a genetic algorithm. The flexible robot arm consists of a first rigid link and a second
…
flexible link, and the desired trajectory is set to be a straight line. In the trajectory planning, the reference trajectory, as if the flexural displacement of the second flexible link is zero, is expressed by use of a cubic spline function, and the velocity profile in the direction of the desired trajectory is depicted using two fifth-order polynomial functions. The individual chromosome of the genetic algorithm is composed using the parameters of the cubic spline function and the fifth-order polynomial functions as the genes. Then, the fitness function of the individual chromosome for the residual vibration reduction and the trajectory tracking control is defined, and the trajectory planning algorithm is constructed using the genetic algorithm. Furthermore, the numerical calculations have been carried out, and it is confirmed that the residual vibrations can be remarkably reduced, and the trajectory error from the desired trajectory can be considerably reduced.
続きを見る
|
||
| 2.
論文 |
論文
|
小島, 宏行 ; 戸塚, 輝成 ; 近藤, 厚哉
概要:
application/pdf<br />Journal Article<br />In this report, the rotation control system of the flexible robot arm is constructed with both the desired signal planning algorithm of the joint angle and the tracking controller. The tracking
…
controller consists of the PD controller and the disturbance observer. Then, the experiments of the rotation control of the flexible robot arm have been carried out. As the results, it is seen that the residual vibrations of the flexible robot arm can be remarkably reduced. Therefore, the usefulness of the present rotation control system of the flexible robot arm using the desired signal planning method of the joint angle and the disturbance observer is confirmed experimentally.
続きを見る
|
||
| 3.
論文 |
論文
|
小島, 宏行
概要:
application/pdf<br />Journal Article<br />In this report, first, the nonlinear equations of motion of a horizontal one-link flexible robot arm are obtained by use of the mode functions of a cantilever beam with a mass. Then, the algorithm
…
of the desired signal planning of the joint angle for the purpose of the reduction control of residual vibrations of the flexible robot arm is derived by use of the initial and final conditions of the flexural displacement of the flexible link and the constraint conditions of the desired signal of the joint angle during the acceleration and deceleration terms as well as the linearized equation of motion of the flexible robot arm. The rotation control system of the flexible robot arm is constructed with the desired signal planning for the joint angle and the PD controller. Furthermore, the numerical simulations of the rotation control of the flexible robot arm have been carried out, and it is confirmed that the residual vibrations of the flexible robot arm can be effectively reduced by the present desired signal planning for the joint angle.
続きを見る
|
