1.

論文

論文
長屋, 幸助 ; 鄭, 惟
出版情報: 日本機械学會論文集. C編.  61  pp.1343-1350,  1995-04-25.  日本機械学会
概要: application/pdf<br />Journal Article<br />This paper discusses vibration control problems of a cantilever plate with variable width. A moment-type actuator using a moving coil was presented. A mothod for obtaining optimal feedback coefficients was proposed on the basis of neural networks. An analytial solution for the response of the plate under the control using the feedback coefficients was obtained. Numerical calculations were carried out for some typical cases. It is clarified that the present method is valid for controlling vibrations of plates. 続きを見る
2.

論文

論文
長屋, 幸助 ; 杉浦, 光則
出版情報: 日本機械学會論文集. C編.  57  pp.3794-3799,  1991-12-25.  日本機械学会
概要: application/pdf<br />Journal Article<br />Since electromagnetic force is a function of the gap between two magnets, the spring constant has large nonlinearities with respect to the displacement. Hence, the spring constant varies significantly with the initial load. This implies that the linear control theory is not applicable in the range of large displacement. To treat a system with variable initial load and large displacement, the present article presents a procedure for obtaining a linear spring by means of a repulsive-type actuator using permanent magnets and an electromagnet. The analytical expression for the linear spring is presented. Experimental tests were carried out, and the theoretical values are compared with the experimental results. 続きを見る
3.

論文

論文
長屋, 幸助 ; 荒井, 徳幸
出版情報: 日本機械学會論文集. C編.  56  pp.1230-1237,  1990-05-25.  日本機械学会
概要: application/pdf<br />Journal Article<br />This paper proposes an actuator in the magnetic levitation system using a permanent magnet and an electromagnet. In this system, the gravity force of the masses is supported by a strong permanent magnet in which two identical poles face each other. The vibration due to external disturbances is controled by use of the electromagnet by changing magnetic fluxes of one of the permanent magnets. The analytical expressions for obtaining the levitation force, spring constant and the control force versus the electric current in the electromagnet were derived using the equation of the electromagnetic theory. Numerical simulations under the control using the optimal regulator for the magnetically levitated boby were carried out. To verify the present theoretical results, experimantal results were also obtained. 続きを見る
4.

論文

論文
長屋, 幸助 ; 佐藤, 浩 ; 中村, 信章 ; 武田, 定彦 ; 永井, 健一 ; 井開, 重男 ; 孫, 健利
出版情報: 日本機械学會論文集. C編.  54  pp.605-609,  1988-03-25.  日本機械学会
概要: application/pdf<br />Journal Article<br />Thi paper describes a method of active vibration control for passing through critical speeds of a rotating shaft using electro-magnetic clutches. In this method the vibration of the shaft due to whirling is controlled by means of on and off electric current controls of the electro-magnetic clutches which support the shaft under the on control, The principle of this method is to change the eigen-frequencies of the shaft by adding or losing the supports during shaft rotation. To verify the present method, this paper provides a model of a rotating shaft system with an electro-magnetic clutch, and examines the results analytically and experimentally. 続きを見る