※一部利用できない機能があります
| 1.
論文 |
論文
|
福室, 允央 ; 大関, 健一郎 ; 斎藤, 正人 ; 葛, 徳梁 ; 村上, 岩範 ; 長屋, 幸助
概要:
application/pdf<br />Journal Article<br />A simple and stable energy-storage flywheel system with high temperature superconducting levitation is presented. In order to have stable levitation, a superconductor and a permanent magnet are
…
used, and 3 permanent magnets support the top of the shaft. In the part of drive system, 8-poles permanent magnet and 8 coils are used to cancel electromagnetic forces in the radial direction. An electromagnetic damper consisting of permanent magnet for levitation and 4 coils is presented which lies at both ends of the shaft. When the shaft vibrates in the direction perpendicular to the shaft axis, current flows in the damper coil. It generates the electromagnetic force. The force is in proportion to vibration frequencies of the shaft, so that the force behaves like damping forces. Using this system, a control like the sensorless control is performed. Experimental tests have been carried out for the system as just mentioned. It is clarified that our system has stable levitation, and vibrations are suppressed significantly.
続きを見る
|
||
| 2.
論文 |
論文
|
Pranoto, Tjahjo ; 長屋, 幸助 ; 細田, 敦史
概要:
application/pdf<br />Journal Article<br />The purpose of this work is to develop a linear damper in the wing of the aircraft. Then it requires the following: (1) The damping force have to be large for low frequency because the vibration
…
frequency of the wing is small. (2) It works for small displacement, (3) Its size has to be small which can be stacked in the wing, and (4) Passive damper is desirable. This article presents a new type linear damper, which satisfies the conditions as just mentioned. The damper consists of a number of thin plates with slits. MR fluid is filled in the damper, so that magnetic fields freeze MR fluid. Resisting torque (friction torque) is generated when the plates slide due to the shear of slits of the plates. The damper works against the bending moment of the wing by responding its deflection. The damper is maintenance free, and it is one of passive dampers with a good durability.
続きを見る
|
||
| 3.
論文 |
論文
|
長屋, 幸助 ; 小林, 譲二 ; 今井, 勝仁
概要:
application/pdf<br />Journal Article<br />This paper presents a method of micro-vibration control of milling machine heads by use of vibration absorber. The principle used in the paper is different from usual absorbers. In the
…
present absorber, an auto-tuning vibration absorber is presented in which the absorber create anti-resonance state. When the anti-resonance is used, the damping has to be significantly small, so it is difficult to suppress higher modes. To suppress higher modes, the present article uses autotuning magnetic damper. It damps higher modes, but it also increase first modal vibration. Then a method of optimal auto tuning control is presented in which both principal and higher modal vibrations are suppressed. Experimental tests are carried out for a real milling machine, and cutting tests are also performed.
続きを見る
|
||
| 4.
論文 |
論文
|
長屋, 幸助 ; 小杉, 泰裕 ; 鈴木, 孝明 ; 村上, 岩範
概要:
application/pdf<br />Journal Article<br />A simple but stable non-contact high Tc superconducting levitation system with a vertical shaft has been presented. The system consists of a superconductor and permanent magnets. In the system,
…
only a lower end of the shaft is supported by a high Tc superconductor, and the other end is supported by two ordinary permanent magnets. Since the restoring force is small with respect to the radial direction the system becomes unstable when the force act in the radial direction, so it is difficult to drive the shaft by electromagnetic forces in using such as motors. Then, a driving system using electromagnets has been presented, in which the balanced forces act on two opposite sides of the disc type rotor in the axial direction. Since the system has no unbalance force from an analytical point of view, the rotor will be able to rotate without control. In the system, however, since there is the eccentricity between the center of rotation and magnetic center, so vibrations are generated. This study also presents an optimal control method of the vibrations. To validates the proposed system, and the control method, experimental tests have been carried out.
続きを見る
|
||
| 5.
論文 |
論文
|
長屋, 幸助 ; 塚越, 正人 ; 小杉, 泰裕 ; 村上, 雅人
概要:
application/pdf<br />Journal Article<br />The present article discusses a modeling and control of high-T_c superconducting levitation system. The paper first clarifies analytical expressions for obtaining nonlinear levitation force
…
given by the present author, then presents at vibration control method in which feedback currents involving frequency weights. In the method, an addition of a square of the displacement and currents in a frequency domain is taken as a cost function. Optimal coefficients of the transfer function of the controller are obtained by minimizing the cost function. Hence, the spillover instability due to the nonlinear vibration will be redriced. Numerical calculations have been carried out for some typical problems. To validate the present method, experimental tests also have been carried out.
続きを見る
|
||
| 6.
論文 |
論文
|
井開, 重男 ; 樫本, 弘 ; 大沢, 恵一 ; 長屋, 幸助
概要:
application/pdf<br />Journal Article<br />This paper presents an actuator with a sensor for controlling vibrations of machines. It consists of a voice coil type electromagnetic actuator connected to piezoelectric sensor and a coil spring.
…
The actuator is used for controlling a motor laid on the beam. The disturbance force due to the centrifugal force of the motor is detected by the sensor, and the force which is equivalent to the disturbance force is applied to the motor and the beam by the actuator. This implies that the disturbance force is canceled. The control technique as just mentioned has advantages because it reduces the vibration in the low frequency region, in addition, the actuator becomes compact, and the control force becomes small. But the control is insufficient for controlling the resonance peak. The PD control is available for reducing the resonance peak, but the displacement and velocity sensors are required. In the present article, a method of vibration control of disturbance cancellation combining the PD control is presented in which both the displacement and velocity sensors are not required. The analytical results for obtaining the control current and the response of both the motor and beam have been obtained. To validate the present actuator sensor system and the control method, experimental tests are carried out.
続きを見る
|
||
| 7.
論文 |
論文
|
井開, 重男 ; 樫本, 弘 ; 阿久澤, 享 ; 長屋, 幸助
概要:
application/pdf<br />Journal Article<br />This paper presents a vibration isolation mechanism without resonance. The mechanism is consisting of a linear sliders, ball screw, servo-motor and a table in which there is no spring
…
element, so the table behaves like a rigid body. In the mechanism, the servo-motor rotates the ball screw with the same displacement as the base displacement in the opposite direction. Hence the disturbance is canceled. A well known relative displacement feedback control method was first discussed, and it was shown that the method was insufficient for isolating vibrations, then a method of disturbance cancellation was presented. To validate the present mechanism and the control method, experimental tests were carried out for a model of the mechanism.
続きを見る
|
||
| 8.
論文 |
論文
|
長屋, 幸助 ; 来栖, 明法 ; 井開, 重男 ; 志谷, 佳久
概要:
application/pdf<br />Journal Article<br />The vibrations of a structure having a vibration absorber without damper vanish at the anti-resonance frequency theoretically. Hence if the rigidity of the absorber is controlled to produce an
…
anti-resonance state according to the forced frequency, the vibrations of the structure can be deleted for sinusoidal forces. However, external vibration force involves higher modes, in general, so the structure is excited by various frequencies. Hence it is difficult to delete the vibrations using the anti-resonance procedure. This paper presents a method to control vibration of structures by combining the auto-tuning control of anti-resonance and optimal dynamic absorbers. Theoretical results under the control have been presented. To validate the present method and the theoretical results, experimental tests have been performed.
続きを見る
|
||
| 9.
論文 |
論文
|
長屋, 幸助 ; 福島, 俊之 ; 井開, 重男 ; 金野, 英介
概要:
application/pdf<br />Journal Article<br />A method of vibration control for a column carrying a mass at its tip subjtected to earthquakes is described. A vibration control mechanism consisting of a gear train for the column is also
…
described. Experimental tests have been performed for a model of the present mechanism. It is shown that the vibration displacements and the moments in the column are reduced significantly in comparison with those in a conventional column without the mechanism. In the present column, energies for controlling vibrations are not required because of the use of earthquake force as a control force. Therefore, the column has advantages over the columns having an active vibration control system.
続きを見る
|
||
| 10.
論文 |
論文
|
李, 連進 ; 長屋, 幸助
概要:
application/pdf<br />Journal Article<br />This paper presents a method for optimizing vibration absorbers on a flexible beam by means of a neural network procedure. Analytical results for the response of the beam with multi-absorbers
…
have been obtained using a transfer matrix method. To achieve optimal control, a cost function composed of second-order nonlinear forms in terms of the displacement, strain, and frequencies was used. A method of minimizing the function was presented, in which input values, weights and output function were effectively controlled on the basis of the back-propagation procedure of the neural network method. Numerical calculations were carried out for an example problem. It is ascertained that the present method gives a better result than that obtained by the previously published method. The validity of the method and the analytical results was confirmed by experimental tests.
続きを見る
|
