※一部利用できない機能があります
| 1.
論文 |
論文
|
星野, 浩之 ; 満山, 陽平 ; 齊藤, 正浩 ; 古畑, 朋彦 ; 新井, 雅隆
概要:
application/pdf<br />Journal Article<br />In order to reveal the soot removal mechanism in Electric Diesel Particulate Trap (E-DPT), mechanism of soot trapping and re-burning of soot particles in exhaust gas was investigated using
…
one channel electric diesel particulate trap (1 channel E-DPT). The E-DPT is capable to trap soot particles by applying DC electric field between electro-plates. The results showed that soot particles like a whisker grew up from negative electrode side toward positive one. Soot particles trapped on the plates formed many soot bridges in narrow space between electro-plates. Formation of soot particles depended on electric intensity. In the condition of F=200 kV/m, lumps of soot were observed instead of whisker like soot bridges and soot trapping and soot re-burning were balanced. Ignition of the soot lump was occurred at the contact point between the lump and electro-plate, however re-burning of whole the lump was rarely observed. Remained soot drifted to down stream. It is thought that many remained soot particles were discharged from the E-DPT. Incomplete reburning of soot lump caused soot removal efficiency deterioration of E-DPT. In the case of narrow space and high electric intensity (F=600kV/m, L=0.5mm), however, soot bridge re-burning was main phenomenon and soot lump re-burning was controlled
続きを見る
|
||
| 2.
論文 |
論文
|
倉持, 大輔 ; 川口, 知宏 ; 古畑, 朋彦 ; 新井, 雅隆
概要:
application/pdf<br />Journal Article<br />Ignition and combustion characteristics of diesel spray impinged on an extrude
…
d wall, which was a top of cylindrical column, were experimentally investigated. Appearance positions of OH and C_2 radical luminosities and luminous flame kernel were stereoscopically observed using a two-way fiber optical system. The extruded column was fixed in a high temperature and high pressure combustion chamber. A diesel spray was impinged vertically to the extruded wall. Effects of cylindrical column diameter (D=5,10,15mm, ∞(flat wall)) on ignition and combustion characteristics were investigated. As the result, appearance position of OH luminosity was observed near the spray tip except for D=∞ (flat wall). The maximum volume of luminous flame impinged on the extruded wall was strongly influenced by the diameter of the column. In a condition of low-ambient temperature, the maximum volume of blue flame on the extruded column of 10 mm diameter was larger than those on other columns.
続きを見る
|
||
| 3.
論文 |
論文
|
川口, 知宏 ; 長瀧, 翼 ; 天谷, 賢児 ; 古畑, 朋彦 ; 新井, 雅隆
概要:
application/pdf<br />Journal Article<br />Ignition and combustion characteristics of diesel spray impinging on a wall were experimentally investigated. Ignition position and appearance position of the luminous flame
…
kernel were stereoscopically observed using a two-way fiber optical system. Flat
続きを見る
|
||
| 4.
論文 |
論文
|
新井, 雅隆 ; 天谷, 賢児 ; 長瀧, 翼 ; 沖田, 秀樹
概要:
application/pdf<br />Journal Article<br />Ignition and combustion characteristics of diesel spray impinging on an inclined wall were experimentally investigated. Ignition position and appearance position of the
…
luminous flame kernel were stereoscopically observed using a two-way fiber optical system. Flat impingement wall was fixed in a high temperature, high pressure combustion chamber. Inclined angle of the flat wall was set at 30 degees or right angle against the center axis of the injection spray. Distance from nozzle tip to the impingement point on the wall was set at 50mm. Effect of ambient temperature on ignition position was investigated. As the result, ignition positions were observed near the spray periphery in the both cases of 30 degrees and right angle impingements. However, the luminous flame appeared near the wall surface at downword side of inclined wall because the fuel rich region was formed around the downword side of spray impingement point.
続きを見る
|
||
| 5.
論文 |
論文
|
河野, 雅文 ; 天谷, 賢児 ; 新井, 雅隆
概要:
application/pdf<br />Journal Article<br />Effect of cetane number on ignition delay and ignition location of disesel spray was experimentally investigated. Five kinds of fuels, which had different cetane numbers of light fraction and
…
heavy fraction of fuel, were used. As a result, the ignition delay was not so affected by the change of cetane number, however, the ignition location was strongly affected by a cetane number. When the light fraction cetane number was low, the ignition was not observed near the nozzle. And when the heavy fraction cetane number was high, the ignition was observed at the position far from the nozzle. Ignition position had an effect on flame development. When the ignition occurred near the nozzle, flame development rate was slow. When the ignition occurred at the position far from the nozzle, flame development rate was fast. In case of the ignition position was far from the nozzle, effect of the cetane number on flame development was remarkable.
続きを見る
|
||
| 6.
論文 |
論文
|
松江, 孝博 ; 新井, 雅隆 ; 廣安, 博之
概要:
application/pdf<br />Journal Article<br />The evaporation and combustion characteristics of a small CWM droplet were analyzed on a hot surface in a test furnace. The minimum temperatures for decomposing combustion caused by the
…
volatile matter of the coal and char combustion rise with a decrease of the initial diameter of the droplet. Droplets with diameters below about 1.3mm show different combustion characteristics from the larger droplets. From the photographic observation of the final state of the burned CWM droplet, the cracked shell and popcorn states were noted on the agglomerated surface of the ash. These symptoms appeared more clearly when the initial diameter of the droplet was larger than 1.3mm. The contraction ratio of the diameter in the dried-up state decreases correspondingly with the decrease in the initial diameter of the droplet.
続きを見る
|
||
| 7.
論文 |
論文
|
松江, 孝博 ; 新井, 雅隆 ; 廣安, 博之
概要:
application/pdf<br />Journal Article<br />The evaporation and combustion characteristics of a single coal-water slurry droplet were studied in an elevated temperature environment and in a hot air stream by measuring the
…
temperature of a burning droplet and observing its behavior. When the droplet was suspended in an elevated temperature environment, the decomposing combustion, that is, the combustion of an inflammable gas included in the coal, started after the dry-up. The surface reaction, that is, the combustion at the coal surface, followed after that. Thereby, the surface reaction was slightly influenced by the decomposing combustion. When the droplet was suspended in a hot air stream, the decomposing combustion started during the surface reaction process and a blue wake flame was induced. In this case, the spread of the surface reaction region was prevented by a flame of the decomposing combustion.
続きを見る
|
||
| 8.
論文 |
論文
|
吉田, 肇 ; 新井, 雅隆 ; 廣安, 博之
概要:
application/pdf<br />Journal Article<br />Ignition characteristics of a propane-air mixture that contains kerosene spray were studied to understand the ignition behavior of an evaporating gasoline spray injected into a cylinder of a
…
direct injection stratified charge (DISC) engine. Ignition probability as a function of an overall equivalence ratio, a mixture ratio of propane/kerosene to the total fuel and spark energy, was measured under atmospheric conditions. Adding a small amount of kerosene spray to a lean propane-air mixture improved the ignition probability of the mixture. A lean propane-air mixture had the suitable mixture ratio of kerosene spray for ignition. The results obtained here will give basic information about the ignition behavior of an evaporating gasoline spray, because a propane-air mixture containing a kerosene spray would simulate various evaporating stages of a gasoline spray.
続きを見る
|
||
| 9.
論文 |
論文
|
吉田, 肇 ; 新井, 雅隆 ; 廣安, 博之
概要:
application/pdf<br />Journal Article<br />The process of flame development in a spark-ignited propane-air mixture that contained kerosene spray was observed by a high-speed VTR. Flame areas were measured on the VTR and the process of flame
…
development was shown as a change of flame area versus time from ignition. Propagation delay, which means a period between spark ignition and the start of rapid flame development, was defined. Effects of an overall equivalence ratio, a mixture ratio of propane/kerosene to the total fuel and spark energy on the propagation delay and development rate of a flame were studied. Each lean propane-air mixture had a suitable value of the mixture ratio of kerosene spray for the minimum propagation delay and maximum development rate of a flame. When the mixture ratio of propane to the total fuel was low, the propagation delay decreased as the spark energy increased.
続きを見る
|
||
| 10.
論文 |
論文
|
柄沢, 隆夫 ; 川口, 暁生 ; 志賀, 聖一 ; 倉林, 俊雄
概要:
application/pdf<br />Journal Article<br />This paper presents an experimental study being aimed at revealing the ignition assistance effect of a hot surface in an alcohol-fueled diesel engine and its mechanism. A single shot of spray was
…
injected into a motored diesel engine. Ignition lag was measured and was split into two regimes, physical lag and chemical lag, by applying a statistical technique presented by S. Kumagai. High-speed direct photographs were also taken. The dependence of those ignition lags were classified into three regions on their Arrhenius plots. In lower hot-surface temperatures, the ignition lags decrease exponentially with increasing the hot-surface temperature. In higher temperature regions, the ignition lags tend to have constant values, passing through the transient region. By combining the high-speed photographs, it is suggested that the hot surface does not initiate flame propagation, but supplies heat to assist the spontaneous ignition as the assistance mechanism.
続きを見る
|
