※一部利用できない機能があります
| 1.
論文 |
論文
|
井開, 重男 ; 樫本, 弘 ; 大沢, 恵一 ; 長屋, 幸助
概要:
application/pdf<br />Journal Article<br />This paper presents an actuator with a sensor for controlling vibrations of machines. It consists of a voice coil type electromagnetic actuator connected to piezoelectric sensor and a coil spring.
…
The actuator is used for controlling a motor laid on the beam. The disturbance force due to the centrifugal force of the motor is detected by the sensor, and the force which is equivalent to the disturbance force is applied to the motor and the beam by the actuator. This implies that the disturbance force is canceled. The control technique as just mentioned has advantages because it reduces the vibration in the low frequency region, in addition, the actuator becomes compact, and the control force becomes small. But the control is insufficient for controlling the resonance peak. The PD control is available for reducing the resonance peak, but the displacement and velocity sensors are required. In the present article, a method of vibration control of disturbance cancellation combining the PD control is presented in which both the displacement and velocity sensors are not required. The analytical results for obtaining the control current and the response of both the motor and beam have been obtained. To validate the present actuator sensor system and the control method, experimental tests are carried out.
続きを見る
|
||
| 2.
論文 |
論文
|
長屋, 幸助 ; 鄭, 惟
概要:
application/pdf<br />Journal Article<br />This paper discusses vibration control problems of a cantilever plate with variable width. A moment-type actuator using a moving coil was presented. A mothod for obtaining optimal feedback
…
coefficients was proposed on the basis of neural networks. An analytial solution for the response of the plate under the control using the feedback coefficients was obtained. Numerical calculations were carried out for some typical cases. It is clarified that the present method is valid for controlling vibrations of plates.
続きを見る
|
